16 kWh Wheeled Portable All-in-One ESS (Dual MPPT, 10 kW Output)

This wheeled portable all-in-one ESS delivers 16 kWh of usable energy built on LFP 314Ah cells, with two independent MPPT trackers each accepting up to 6,000 W of PV and a 10 kW AC input/output. It is truly plug-and-play, supports parallel expansion from 16 to 160 kWh across 1–10 battery packs and 10 to 60 kW across 1–6 inverters, and is protected by reverse-polarity, PV night reverse-current, over/under-voltage, short-circuit, overload, over-current, over-temperature, parallel-connection-error and synchronisation-signal fault protection. Conformal coating and USB/RS485 (WiFi/GPRS) plus dry-contact communication make it a flexible, deployable power source for mobile and off-grid use.

Product Specifications

Parameter Value
Cell chemistry LFP 314Ah
Rated energy 16kWh
Expandable capacity 16-160 kWh (1-10 Battery Packs)
Standard charge/discharge current 50-100A
Series-parallel configuration 16S1P Per Pack
Max. output current 200A
Rated voltage 51.2V
Operating voltage range 44.8V-57.6V
Max. PV input power 6,000W + 6,000W (Dual MPPT)
MPPT voltage range 90-450 VDC
Number of MPPT 2
Max. PV input current per MPPT 22A
Rated input/output power (AC) 10 kW
Expandable AC power 10-60kW (1-6 Inverters)
Rated input/output voltage (AC) 220V/230V/240V (Adjustable)
Rated AC frequency 50Hz/60Hz
Display LCD Display
IP rating IP20
Altitude 4,000m (Derating above 2,000m)
Operating temperature -10° C to 55° C (Derating above 45° C)
Relative humidity 5% to 95% (Conformal Coating Protection)
Battery cycle life 6,000 Cycles
Safety protection Reverse Polarity, PV Night Reverse-Current, Over/Under Voltage, Short Circuit, Overload, Over Current, Over Temperature, Parallel Connection Error, Synchronization Signal Fault Protection
Communication USB/RS485(/WiFi/GPRS)/Dry Contact
Installation Plug & Play
Inverter dimensions (L×W×H) L695 × W270 × H400
Battery pack dimensions (L×W×H) L695 × W270 × H495
Caster height 85mm
Weight ~148kg
Certification CE, RoHS, UN38.3, IEC62619

Product Datasheet

Download the full product specifications and technical data.

Download PDF
Cell chemistry LFP 314Ah
Rated energy 16kWh
Expandable capacity 16-160 kWh (1-10 Battery Packs)
Standard charge/discharge current 50-100A
Series-parallel configuration 16S1P Per Pack
Max. output current 200A
Rated voltage 51.2V
Operating voltage range 44.8V-57.6V
Max. PV input power 6,000W + 6,000W (Dual MPPT)
MPPT voltage range 90-450 VDC
Number of MPPT 2
Max. PV input current per MPPT 22A
Rated input/output power (AC) 10 kW
Expandable AC power 10-60kW (1-6 Inverters)
Rated input/output voltage (AC) 220V/230V/240V (Adjustable)
Rated AC frequency 50Hz/60Hz
Display LCD Display
IP rating IP20
Altitude 4,000m (Derating above 2,000m)
Operating temperature -10° C to 55° C (Derating above 45° C)
Relative humidity 5% to 95% (Conformal Coating Protection)
Battery cycle life 6,000 Cycles
Safety protection Reverse Polarity, PV Night Reverse-Current, Over/Under Voltage, Short Circuit, Overload, Over Current, Over Temperature, Parallel Connection Error, Synchronization Signal Fault Protection
Communication USB/RS485(/WiFi/GPRS)/Dry Contact
Installation Plug & Play
Inverter dimensions (L×W×H) L695 × W270 × H400
Battery pack dimensions (L×W×H) L695 × W270 × H495
Caster height 85mm
Weight ~148kg
Certification CE, RoHS, UN38.3, IEC62619
WhatsApp Us